Table of Contents
Advertisement
Truck to Terminal Safety Communications
Model Speci c Functions
Default Files
To create a default le:
1. Press the "Default" button from the main screen
2. Then press the "Edit Defaults" button.
3. Using the down and up buttons, scroll to nd the parameter to
be updated/recorded, and select edit.
4. Using the on-screen keyboard, enter the new value and press
"Enter" on the keyboard.
5. To exit the edit screen from the keyboard without making
changes, press the tab key (above the "Caps Lock" key).
6. Once all default values have been edited, press the "Save to
File" button to write the list into the programmer memory.
The programmer will retain the default le even after it is shut off or
batteries are changed.
To upload this parameter values saved to the default le to a new Super
T.I.M., press the "Save to T.I.M." button to start the upload. The upload
status will be displayed at the bottom of the screen. A complete upload
typically takes about 30 seconds.
Builder Parameters
In addition to the default le upload feature, parameters can be
individually recorded in the Super T.I.M. as well. To directly update a
parameter:
1. Press the "Edit params" button.
2. Using the down and up buttons, scroll to nd the parameter to
be updated/recorded, and press "Edit".
3. Using the on-screen keyboard, enter the new value and press
"Enter" on the keyboard.
4. To exit the edit screen from the keyboard without making
changes, press the tab key (above the "Caps Lock" key).
Page 9.
Advertisement
Table of Contents
