Download Print this page
Panasonic WV-CS4SA Operating Instructions

Panasonic WV-CS4SA Operating Instructions

Dome cover
Hide thumbs Also See for WV-CS4SA:

Advertisement

Quick Links

Before attempting to connect or install this product, please read these instructions carefully and
Precautions
• Do not attach the dome cover if the camera is mounted on the ceiling.
Doing so may result in an injury if the dome cover falls.
• Do not remove the protective sheet until the camera has been installed in position to prevent scratches during installa-
tion.
Mounting procedures
1
Push the tab in the square hole on the camera with a
tapered tool such as tweezers.
With maintaining this state, rotate the dome fix ring
counterclockwise, removing the dome fix ring and
dome cover.
Dome fix ring
Dome cover
Square hole
q Push
Dome fix
ring
w Rotate
Camera
save this manual for future use.
e Remove
r Remove
Tab
Operating Instructions
WV-CS4SA
Model No.
2
Align the hook on the dome cover (smoke type) and
the grappling hole on the camera, installing the dome
cover.
Note:
• Remove the edge of the protective sheet temporarily.
It may prevent the dome fix ring from being installed.
Leave the protective sheet attached until you install
the camera after fixing the dome ring in order to pre-
vent the dome from being damaged or getting dust.
Protective sheet
Grappling hole
Dome Cover
Install
Hook
Camera

Advertisement

loading

Summary of Contents for Panasonic WV-CS4SA

  • Page 1 Operating Instructions Dome Cover WV-CS4SA Model No. Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use. Precautions • Do not attach the dome cover if the camera is mounted on the ceiling. Doing so may result in an injury if the dome cover falls. • Do not remove the protective sheet until the camera has been installed in position to prevent scratches during installa- tion. Mounting procedures Push the tab in the square hole on the camera with a Align the hook on the dome cover (smoke type) and tapered tool such as tweezers. the grappling hole on the camera, installing the dome With maintaining this state, rotate the dome fix ring cover.
  • Page 2 Insert Align the position Specifications Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca...