Manual Supplement
4. Connect the test leads with the voltage measurement inputs:
OR
5. Use the short fan out of the Voltage Test Lead, 3-phase + N.
Plug the connector A/L1 into the socket A/L1 of the voltage
measurement inputs of the Logger. Repeat this with B/L2, C/L3
and N.
Connect A/L1 with one input of the power supply.
Connect N with the second input of the power supply.
Connect A/L1 with one input of the power supply.
Connect B/L2 with the second input of the power supply.
1742/1746/1748 Users
2
8/18