How Do I Connect My Cookeasy+ To A Different Wi-Fi Network - Kenwood CookEasy+ CCL50 Getting Started

● Ensure that your router is operating on a 2.4GHz band (check with the manufacturer's
instructions for how to do this).
● Check that your router's security protocols are set to either WPA or WPA2 (see
manufacturer's instructions for how to do this).
● If you have a hidden network, you will need to check the manufacturer's instructions in
order to broadcast the Wi-Fi network name (SSID).
● If you are trying to connect to a captive portal (such as hotel's Wi-Fi network), you will need
to contact the network administrator with the appliance's MAC address. To find the MAC
address:
1. Tap "Settings"
2. Select "About Appliance".
If the problem persists, please contact

How do I connect my CookEasy+ to a different Wi-Fi network?

Your CookEasy+ will only save one Wi-Fi network at a time, to switch networks follow the steps
below:
Before starting:
● Make sure your Wi-Fi router is switched on and connected to the internet.
● Have your appliance plugged in and the On/Off switch in the On position.
● Have your Wi-Fi network name (SSID) and Wi-Fi network password ready (remember,
passwords are case sensitive).
● Make sure your smart device's location settings are turned on (for Android only).
1. Turn on your appliance.
2. Tap "Settings"
3. Select "WiFi".
4. Select "Forget Network...".
5. Open the app.
6. Tap the "Kitchen" icon.
7. Tap "Add an Appliance".
8. Scroll, choose your appliance and select "Connect".
9. Follow the instructions shown.
Note:
You will be prompted to press and hold down the OK button, if you don't see a name similar
•
to KENWOOD123456 or a PIN code on the display screen, wait 10 seconds and try again.
You will be prompted to select the KENWOOD123456 (or similar) network from your smart
•
device's WiFi settings. Once selected, your smart device may display "No Internet
Connection" next to the network name, this is normal.
• If the set up process fails or cannot connect, ensure you have checked the "before
connecting" points above.
• If display stops showing KENWOOD123456 (or similar) before you connect to the
KENWOOD123456 network, you may need to restart the process.
If you need any more help, please contact
CCL50 Getting Started with Your Appliance Eng – Iss1
.
Customer Support
.
Customer Support
for assistance.
for assistance.