CMT-BT60/BT60B/BT80W/BT80WB
2-5.
CD MECHANISM DECK BLOCK
Note 1: Before disconnecting all flexible flat cable and connector of CD mechanism deck block, solder the short-land.
1 Solder the short-land.
Note 2: When assembling the CD
mechanism deck block,
remove the solder of
short-land after connecting
all flexible flat cable
and connector.
OK
Solder is removed cleanly.
NG
Solder is not removed.
12
2 two screws
(BVTP3
10)
6 connector
(CN502)
– Front top view –
Note 3: When installing the flexible flat cable, ensure the colored line.
No slanting after insertion.
Insert is straight to the interior.
flexible flat
cable
colored line
connector
Note 4: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
OK
Insert is straight
to the interior.
connector
connector
7 CD mechanism deck block
2 two screws
3 Remove the CD mechanism
deck block in the direction
of an arrow.
4 flexible flat cable (7P)
(CN831)
5 flexible flat cable (24P)
(CN501)
OK
Insert is incline
flexible flat
cable
colored line
connector
NG
Insert is shallow
connector
connector
(BVTP3
10)
NG
NG
Insert is incline
connector
connector