Specifications - Samsung SW-252B Manual

Specifications

SAMSUNG continually strives to improve its products. Both the design specifications and these user
instructions are thus subject to change without notice.
Technical Specifications
ITEM
Disc types
DISC
supported
in read mode
Erasing disc types CD-RW
Disc diameter
DRIVE Data transfer rate
PERFORMANCE
Access time
(Random)
Data Buffer
Laser
Slide mechanism
Spindle motor
Load mechanism
ERROR RATE
FRONT PANEL Eject button
Indicator
Headphone output Stereo mini-jack (Ø 3.6 mm) 0.65 ± 20% (vrms) 33 ohm
Volume control
Required power
REAR PANEL
Interface connector ATAPI BUS (E-IDE)
Audio output
Jumper block
Operations
OPERATING
ENVIRONMENT
Storage
Dimensions
GENERAL
Net weight
MTBF
RELIABILITY
"Design and specifications are subject to change without prior notice."
SW-252B
CD-RW
CD-DA(Audio), CD-ROM, CD-ROM XA, CD-Plus, CD-Extra,
Photo-CD(Single, Multi-session), Video CD ready, Enhanced CD,
CD-I/FMV, CD-R, CD-RW, CD-TEXT
120 mm or 80 mm
Recording CD-R:
CD-RW :
Ultra Speed Writing DISC:
High Speed Writing DISC:
Low Speed Writing DISC:
Reading
CD-ROM:
CD-R:
CD-RW:
PIO Mode 4:16.6MB/sec
Multiword DMA mode 2 : 16.6MB/sec
UDMA mode 2 : 33.3MB/sec
110ms
Bulk Type : 2MB
Retail Pack : 8MB
Semiconductor laser
Stepping motor
Brushless motor
Tray. DC motor (Soft Eject). Horizontal/Vertical.
-12
Mode 1: 1 block/10 , Mode 2: 1 block/10
Auto eject or Auto inject
Play / Read (GREEN) Record (RED), Operation LED
Dial type
+5 VDC: 1.5 A (Peak), +12 VDC: 1.5 A (Peak)
Line out 0.75V ± 20% (vrms) : 47Kohm
Molex 70203 or other compatible models
Temperature: 5~45°C Humidity: 10~80%
Temperature: -25~60°C Humidity: 10~90%
148.2 (W) x 42 (H) x 184 (D) mm (including bezel)
780 g
125,000 POH(Duty 20%)
600 KB/sec. (4X),
1200 KB/sec. (8X),
1800 KB/sec. (12X),
2400 KB/sec. (16X),
3600 KB/sec. (24X),
4800 KB/sec. (32X),
6000 KB/sec. (40X),
7200 KB/sec. (48X),
7800 KB/sec. (52X)
3600 KB/sec. (24X)
1500 KB/sec. (10X)
600 KB/sec. (4X)
CAV 52X
CAV 40X
CAV 40X
-9