Table of Contents
Advertisement
Overview
Thank you for purchasing the EC-TS-1100 touch screen monitor.
technology and provide better after-sales service continuously. Please take time to read this user manual
before system installation.
Note: Information in this user manual may change without prior notice
1. Safety Information
Make sure the power voltage is correct and the ground connection of the power outlet is working properly
before plug in the electricity.
During lightning storm, unplug the network cable, power cable and any other connections.
Turn off power before connect any devices (except USB devices) to the terminal.
Do not attempt to open the chassis. There is a possibility of electric shock.
authorized service provider.
Do not spill liquid on the monitor or place any objects into the ventilation holes. It may cause short-circuit
for the internal components and cause a fire or electric shock.
After the computer is stored below temperature of 10 degree, put the machine at room temperature (10 –
35 degree) in the original packing for not less than two hours to resume to room temperature before
operation. This is to avoid condensation that might bring electrical damage.
Keep the terminal clean, dry, away from dust, moisture and direct sunlight.
Do not use harsh chemicals or strong cleaning solvents to clean the LCD or touch panel. Use a soft terry
cloth with mild cleaning liquid.
Do not share the same power outlet with high power electrical appliances, keep distance from high level
magnetic interference.
Do not use sharp pointed objects to operate, it will cause damage to the screen.
When the following occurs:
Water go in the LCD monitor;
Physical damage accidentally;
Burning smell from the monitor;
disconnect the power supply immediately, unplug the power cord and contact a qualified service
technician.
VP-1100-2
nd
-10.1 User Manual
We are committed to use up-to-date
For service, contact the
- 2 -
Advertisement
Table of Contents
