Sengled element Z01-hub Quick Start Manual page 4

Parameter
Z01-hub
100-240V
30mA , 2W(rate)
User Operation Instructor
Ⅰ Software download way
Step1: Log in
Step2: you can see the android and IOS APP download address. Then click
the download button for setup .
ⅡEquipment installation method
Tighten the Element bulb clockwise on the bulbholder and light to electricity.
Power on the Element hub and connect the hub to your home network
cable.To ensure that the state of thehub is right，Please long press the reset
button on the hub over 7 seconds. Quickly power on and off the bulb10 times
to make sure it is reset factory settings.The bulbwill flashes 3times if it was
factory mode.
ⅢApp Operation Method

1. Open the App, named Element . The logo is as this ,
2. Log in sengledaccount . If you haven't the cloud account, you can register
one or continue without login(as the PIC 3.2.1).
3. If you don't log in with a account, you can only use element local features.
PIC 3.2.1
Element User Menu
https://appdownload.cloud.sengled.com:8099/
.