Listening To The Radio; Presetting Stations - Samsung HTDL200PTHXAA Instruction Manual

Listening to the Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the
automatic or manual tuning operation.
1
Remote
Press the Tuner(Band)
Control
button.
Unit
•
The selection toggles back
and forth between "FM" and
"AM" each time the
Tuner(Band) button is
pressed.
Manual Station
1
Press the Function button to
Main
select the desired band (FM,
Unit
AM).
Manual Station
Audio
To Listen in Mono/Stereo
MO/ST
Press the MO/ST button. (FM only)
•
The selection toggles back and forth between "STEREO" and "MONO"
each time the MO/ST button is pressed.
•
In a poor reception areas, select Mono mode for a clear, interference-free
broadcast.
41
2
Select a broadcast station.
When the button is pressed, a preset
Auto Station 1
broadcast station is selected.
Hold in the button. Automatic searching
Auto Station 2
begins, and then stops when a station is tuned in.
Press the button to tune to the chosen
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
2
Select a broadcast station.
Press the button to select the PRESET mode. Then
Auto Station 1
press the button to select a station stored in
the preset. See the instructions on the next page to
preset stations.
Auto Station 2
Press the Stop ( ) button to select the MANUAL
mode on the front panel. Then hold in the
button to make the unit begin automatically searching for
broadcast stations.
Press the Stop ( ) button to select the MANUAL mode
on the front panel. Press the button to tune
to the desired station. The frequency changes
incrementally in either direction each time the
corresponding button is pressed.

Presetting stations

You can store up to:
15 FM stations
15 AM stations
Example: Presetting FM 89.1 in the memory
1 2
Press the Tuner(Band) button Select MANUAL by pressing
and select the FM band. the Stop (
main unit.
•
The selection toggles back and forth between "FM" and "AM"
each time the Tuner(Band) button is pressed.
MH Z
L R L R
4 5
Press the Program button on If you want to save 89.1 to another
the remote control, FM1 will preset location(FM2~FM15), press
flash. If you want to save 89.1 or , then press
to FM1, press Program again. Program to save it to that location.
PROGRAM MH
Z
L R L R
L R
To store other Channels To tune in a preset station
Follow steps 3~5 again.
• FM Frequency Modulation
• AM(MW) Medium Wave
3
Use the and
button to tune to 89.1
) button on the
L R
6
To preset other stations,
follow steps 1~4 again.
PROGRAM MH
Z
MH Z
See the previous page.
MH Z
42