Remote Control - Conrad Electronic Modelcraft Operating Instructions Manual



8. Remote control

1 Telescopic antenna
2 On/off switch ("I" = on, "O" = off)
3 LED "BATT", is lit when the transmitter is on or
blinks if the battery/accumulator voltage is too
low
4 Throttle
5 Rotating wheel for steering
6 Crystal (exchangeable)
7 Trim control „ST.TRIM" for steering
8 Trim control "TH.TRIM" for the motor
9 Reverse switch „ST.REV" for steering
10 Reverse switch „TH.REV" for the motor
11 Charging socket
Please note: Maybe this version of the remote
control does not have a charging socket. In this
case, remove the inserted batteries and charge
them externally.
12 Battery/accumulator compartment
28
Figure 1