Page 1
QUICK GUIDE for using SCB30B-E1000 Page 2 WIRING DIAGRAM Page 3 FRONT PANEL (keyboard / display) Page 4 MENU (SET, Temperature Setting of Probes) Page 5 MENU (TIME, Set Time, Day, Month, Year) Page 5/6 MENU (TIMER Program) Page 6 MENU (PAR, Setting Parameters, H5 codes)
Page 2
1.PW = Mains Power Connection. (Live Link to outputs 1-4 as required). 2.Detectors = Warning Lights if required. 3.Outputs = Burners or Zone Connections. 4.Probes – Sensor / BMS Connection.
Page 4
MENU Press the menu followed by the key to scroll through the menu SET, TIME, PAR, FN and INFO. The menu is in the following order: 1. SET, this is to set the Temperature Sensors. 2. TIME, used to set the Time, Date Month, Year, Weekday. 3.
2. TIME Used to set the time, date, year, month. Press (SET will be displayed) then, then, this will display the current set time. Press then use the to change the Hour. Press then use the to change the Minutes. . Press then use the to change the Day (1 to 7.
Page 6
Once you have set all your ONs and OFFs you can review all the programs you have set by Pressing (SET will be displayed) then, then, then, Fnc will be displayed then press . AN-1 will be displayed, press and AUTO will be displayed. Press Then using the key you can scroll through all the timer settings that have been set up and add more if required.
Page 7
5.KEYPAD Lock To lock the keypad go into the PAR (section 4 above) and scroll through until you find the HL, set this to YES. When the keypad is locked, the message LOC will be displayed anytime a key is pressed. To temporarily unlock the keypad hold for at least 3 secs until the message UnL is displayed.