Page 1
QUICK GUIDE for using SCB60B-E1111 Page 2. WIRING DIAGRAM Page 3. FRONT PANEL (keyboard / display) Page 4. MENU (SET, Temperature Setting Probes) Page 5. MENU (TIME, Set Time, Day, Month, Year) Page 5/6. MENU (TIMER programs) Page 6. MENU (PAR, Setting Parameters, H5 codes) Page 7.
Page 4
MENU Press the menu followed by the key to scroll through the menu SET, TIME, PAR, FN and INFO. The menu is in the following order: 1. SET, this is to set the Temperature Sensors. 2. TIME, used to set the Time, Date Month, Year, Weekday. 3.
2. TIME Used to set the time, date, year, month. Press (SET will be displayed) then, then, this will display the current set time. Press then use the to change the Hour. Press then use the to change the Minutes. . Press then use the to change the Day (1 to 7.
Page 6
Once you have set all your ONs and OFFs you can review all the programs you have set by Pressing (SET will be displayed) then, then, then, Fnc will be displayed then press . AN-1 will be displayed, press and AUTO will be displayed. Press Then using the key you can scroll through all the timer settings that have been set up and add more if required.
Page 7
The FB code is the stop time of the common fan and burners before any burner ignition. We Factory set this at 8 but can be adjusted to anything between 2 and 250 seconds. To set this Scroll through the parameters until you come to FB then Press , using scroll to the desired setting, we factory set this to 8 if a common fan is used.
Page 8
6.KEYPAD Lock To lock the keypad go into the PAR (section 4 above) and scroll through until you find the HL, set this to YES. When the keypad is locked, the message LOC will be displayed anytime a key is pressed. To temporarily unlock the keypad hold for at least 3 secs until the message UnL is displayed.