Pressing Out The Hole - Outbound RA Series Installation Manual

• S ufficient space needs to be available for installing the inner
and outer frames.
• O nly install the frame on flat surfaces and do not bend the frame.
• T orsion and tension in the box and panels can damage the
windows.
• C heck if the product measurements match the drawing
measurements.
• C heck the positioning of the window on the in- and outside
of the vehicle.
• Always mount the windows with the hinge on top.
WARNING! Do NOT remove the coloured filling plates and foam
The products have coloured filling plates in the gaps around the
frame. The purpose of these filling plates is to maintain a uni-
form gap around the product for easy installation. We advise to
leave these in place until the installation is completely finished
and the glue is dry.
3 Pressing / cutting out the hole
Make the cut-out according to the drawing below. In the drawing and the diagram with the measurements,
a margin has already been taken into account in order to install the products. Always place the product
tension-free.
Outbound window and roller blind installation
12