Safety And Installation Instructions; Instructions Before Installation - Outbound RA Series Installation Manual

1

Safety and installation instructions

Please read the prescribed safety instructions and stipulations from the vehicle manu-facturer and service
workshops.
Leave all the coloured fillerplates and foam in their current position till the window is completely installed!
Before starting the installation we strongly suggest to check if this is having an impact on the vehicle
registration. This to avoid possible problems with government authorities and/ or with your insurance
company.
Outbound accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences.
• Alterations to the window and roller blinds.
WARNING! Beware of injury
Failure to observe this instruction can cause material damage and impair the function of the window
or roller blind.
NOTE
If you do not have sufficient technical knowledge for installing the components in vehicles, you should
have a specialist install the window in your vehicle.
Please note the following:
• If faults or disturbances occur, consult a specialist workshop immediately.
• Risk of breakage! Do not tread on the glass.
• B efore starting your journey, check that the windows are locked properly and free from damage.
• Close the roof window in strong wind, and upon precipitation.
WARNING!
Always keep the window closed while driving.
2

Instructions before installation

Before installation, check the wall thickness of your vehicle. Outbound windows can be used without
modification in a 55mm to 70mm thick wall with roller blind and 60mm to 85mm without roller blind.
Below 55mm with rollo we ask you to fill and reinforce the wall with a frame, without rollo 60mm.
When choosing the installation location, observe the following:
• A djoining components (attachment and reinforcing parts), cables and cabinets in the vehicle interior
must not get damaged when sawing the hole.
Outbound window and roller blind installation
11