Advertisement
The wiring diagram to connect the outdoor cable of the OUTDOOR HOUSING(SHG-221/222)
3. If you mount the Wall Mount Adaptor on the wall, mark a hole where you insert the anchor
bolt or anchor nut (M10) using the Cover Plate, and drill a hole for the anchor bolt (nut).
If you install it in a corner of the wall, use the Corner Mount Adaptor (SADT-110CM).
If installing on the pole of the wall, use the Pole Mount Adaptor (SADT-100PM) for this
purpose.
2_SADT-103WM
SADT-103WM_ENG.indd 2
COVER PLATE
The hole for joining
a ANCHOR BOLT
80 mm
2008-03-18 오전 9:13:52
Advertisement
