Connecting The Video Out To Your Tv; Listening To Radio; Connecting Audio From External Components - Samsung HT-BD2E Quick Start Manual

4 connecting the video out to your tv

Choose one of the three methods for connecting to a TV.
METHOD3 METHOD2
(supplied)
METHOD 1 : HDMI
Connect the HDMI cable(not supplied) from the HDMI OUT jack on the back of the Blu-ray Home Theater to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video
Output (Pr, Pb and Y) Jacks on the back of the Blu-ray Home Theater to the Component Video Input Jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Blu-ray Home Theater to the VIDEO IN jack on your TV.
M
Depending on your TV, certain HDMI output resolutions may not work.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home Theater's output is set to
HDMI automatically within 10 seconds.
If Component and HDMI are both connected, HDMI mode is automatically selected.
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the
HDMI output resolution will be automatically set to the highest provided by the TV.
If you connect a Samsung TV to the Blu-ray Home Theater using an HDMI cable, the player can be easily
operated using the TV remote control.
(This is only available with Samsung TVs that support the Anynet+ feature.)
If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stop
playing.
After making the video connection, set the Video input source on your TV to match the Corresponding Video
output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc.
If the resolution is set to 'i' (ex: 480i or 1080i), the output is displayed in 30 frames per second and if set to 'p'
(ex: 480p, 720p, 1080p), it will be displayed in 60 frames per second.
i : interlaced mode (30 frames) p : progressive mode (60 frames)
4 - English
Resolution according to the output mode
BD playback
•
Setup
1080p, Movie Frame(24Fs) off
1080p/1080i, Movie Frame (24Fs) on
1080i, Movie Frame (24Fs) off
METHOD1
• DVD playback
Setup
M

5 connecting audio from external components

OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input
(OPTICAL 1 or OPTICAL 2) on the
Blu-ray Home Theater to the Digital Output of
the external digital component.
2. Press the D.IN button on the remote control
to select D.IN 1 or D.IN 2 input.
• You can also use the FUNCTION button
on the main unit.
The mode switches as follows :
BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM
M
Output
HDMI Component VIDeO
1080p@60F 1080i 480i
1080p@24F 1080i 480i
1080i 1080i 480i
720p 720p 720p 480i
480p 480p 480p 480i
480i 480P 480i 480i
Output
HDMI Component VIDeO
1080p 1080p@60F 480p 480i
1080i 1080i 480p 480i
720p 720p 480p 480i
480p 480p 480p 480i
480i 480P 480i 480i
Please refer to user guide for more detail.
Optical Cable(not supplied)
To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.
5 - English

6 listening to radio

Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid
surface.
M
This unit does not receive AM broadcasts.
Listening to Radio
Remote Control
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the SKIP ( ) button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the
TUNING/CH ( ) button to automatically search for active broadcasting stations.
• Manual Tuning : Briefly press the TUNING/CH ( ) button to increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP ( ) button to select PRESET and then press the SKIP (
the preset station.
• Automatic Tuning 2 : Press the STOP ( ) button to select MANUAL and then press and hold the
SKIP ( ) button to automatically search the band.
• Manual Tuning : Press the STOP ( ) button to select MANUAL and then briefly press the SKIP (
in to a lower or higher frequency.
6 - English
FM Antenna(supplied)
) button to select
) button to tune