Setting The Clock; Setting The Clock Automatically - Samsung DVD-V8500 Instruction Manual

Setting the Clock

This menu is used to set the current time. You need to set the time to use timer recording.

Setting the Clock Automatically

1
Press the MENU button.
2
Press the .../† buttons to
select Setup, then press the √
or ENTER button.
3
Press the .../† buttons to
select Clock, then press the √
or ENTER button.
4
Press the .../† buttons to
select Auto Clock, then press
the √ or ENTER button.
5
Select a channel that carries a
time signal by using the √ or
ENTER button.
(Auto, 1, 2, ...., 125)
I S
N I T I A L E T U P
Notes
You must have the antenna connected to set
the Auto Clock. (See pages 11~12)
The Clock will be automatically set when you
turn off the DVD-VCR.
ENG-21