Connecting A Power Cord & Auto Setup - Samsung DVD-V5500 Instruction Manual

Connecting a Power Cord & Auto Setup
1
Your DVD-VCR's power cord should be plugged
into a standard 120V/60Hz wall outlet. Avoid
pressing any buttons on the remote control or on
the unit during Auto Setup. While your DVD-VCR
is running Auto Setup, "Auto" will blink. When
Auto Setup is complete, the current time will be
displayed on the front panel. If Auto Setup fails to
locate a channel to set the clock, you should set
the clock manually. (See page 22 to 23.)
2
Turn on the power by pressing the POWER
button on the remote control or on the front panel.
3
Turn on your TV by pressing the POWER button
on the TV remote control.
C
O N N E C T I O N S
You must have the anttenna
connected to set the Auto Clock
You must have the anttenna connected to set
the Auto Clock. (See pages 11~12).
ENG-19