pottery barn kids LARKIN Manual page 13

6
(J)
ENGLISH
ASSEMBLY INSTRUCTIONS TO CONVERT CRIB INTO FULL SIZE BED (headboard only)
With the addition of a Box Spring Frame (sold separately), your Larkin 4-in-1 Crib Headboard can be utilized as a full
sized headboard. Follow the instructions below with (2) Adults:
1. Disassemble your crib or toddler bed and set all pieces and hardware aside in an organized manner.
2. Assemble the Box Spring Frame according to the instructions included with the frame.
3. Place the (2) Applique (PART 6) over the pre-drilled hole on headboard posts and insert (2) Bolt (L) from the
other side of the posts to secure the (2) Appliqué.
4. Hold the Larkin 4-in-1 Crib Headboard upright near the desired location in the room.
5. Insert (4) Bolt (J) into pre-drilled holes in the bottom back side of both legs. Attach and align the Box Spring
Frame onto Headboard leg bolts. Slide a Flat Washer (I), Spring Washer (H) onto each bolt from the other end
and tighten with a Nut (G), using Allen Key (A) and Wrench (F).
6. Adjust levelers located on bottom of the headboard posts to keep the bed level when needed.
7
6
(I)
(H)
(G)
(F)
13/14