Related Manuals for pottery barn kids GRAHAM
Summary of Contents for pottery barn kids GRAHAM
- Page 1 pottery barn kids GRAHAM TODDLER BED CONVERSION KIT www.potterybarnkids.com Date: 2016-May-11 Page 1 of 7 Rev: ...
- Page 2 WARNING ENTRAPMENT/STRANGULATION HAZARD: Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. ...
- Page 3 PARTS INCLUDED: (N). GUARDRAIL (1x) CRIB PARTS (Sold separately): (A). CRIB END (2x) (B). CRIB SIDE (1x) (C). MATTRESS BASE (1x) HARDWARE REQUIRED Allen Bolt M6x1-1/2” -3x (P) End Cap M6 -2x (D) Allen key with ball tip - 2x HARDWARE REQUIRED (From Crib): (F)Medium Allen...
- Page 4 Assembly Instruction Steps: Take out the Magnetic Décor cover (M) from the Crib End (A). Remove the (B) by following these steps below. Picture 2‐1 Remove (E) as shown at Picture 2‐2 Loosen the 2 front bolts (G) to remove (B) easier as shown at Note: Keep (E&H) aside for later use on toddler bed assembly.
- Page 5 Note: The mattress base (C) should be at the lowest level (Level 1) for a Toddler bed. If your mattress base is not at the lowest level, follow instructions below to change. a. Remove the matress base from the high position by removing the 4 bolts (F) b.
- Page 6 Slowly turn the toddler bed kit upright. Check alignments and fully tighten all connections at this time. Do not over tighten. Attach (O&P) to Crib End (A) as shown below. Attach the Magnetic Décor cover (M) into the Crib End (A). Date: 2016-May-11 Page 6 of 7 Rev:...
- Page 7 9. Assembly is now complete. 10. Place the assembly instructions back into the envelope mounted on the mattress base for future reference. CARE INSTRUCTIONS: ‧ Dust often using a clean, soft, dry lint-free cloth. ‧ Blot spills immediately, and wipe with a clean, damp cloth. ‧...
Need help?
Do you have a question about the GRAHAM and is the answer not in the manual?
Questions and answers