IBM PS/2 95 XP 486 Hardware Maintenance Reference page 23

Hide thumbs Also See for PS/2 95 XP 486:

Table of Contents

2.3 Terminators

Terminator requirements are:

Diskette Drives: do not require terminators.

Hard Disk Drives and other storage devices:

The last device in any SCSI chain must have the terminator

installed.

(Some devices may have more than one terminator.)

All other optional SCSI devices installed inside the system unit

must have the terminators removed.

SCSI Adapter:

Terminator requirements for the SCSI adapter vary

depending on the configuration of the system.

The location and appearance of the terminators may vary from drive to

drive.

An identification label or tag (usually "T-RES") is attached

to each terminator for easy identification.

Note:

For additional information on this subject, see "SCSI Devices"

in the "Options and Adapters" section, of the Hardware

Maintenance Reference manual.

IBM PS/2 Model 95 XP 486 HMR

Terminators

2.3 - 1

Table of Contents