IBM PS/2 35 SX Hardware Maintenance Reference page 44

6.11 1055 System Board
Cover (1005)
Adapters (1010)
Retainer Plate (1065)
Diskette Drive (1025)
Hard Disk Drive (1020)
Control Assembly (1060)
Bus Adapter (1015)
Math Coprocessor, if installed
Memory Module Kits (1050).
1. Remove the cable shield
2. Disconnect all cables and remove screws
3. Lift the system board to clear the locating pin, then remove the
system board 3 from the system unit.
4. When a new system board is installed, use the backup copy of the
Starter Diskette to set the time and date, and to restore unique
configuration data.
IBM PS/2 Model 35 SX, 35 LS, 35 SLC HMR
1055 System Board
(1045)
2 .
1 from the system board.
PICTURE 19
¦ Copyright IBM Corp. 1991, 1992
6.11 - 1