venus-04-en
6/3/03 3:07 PM
O
P E R AT I O N
To Edit the Input Source Name
Name the input device connected to the input jacks to make your input source selection easier.
1
Press the MENU button
to display the on-
screen menu.
Press the DOWN
button to select "Input",
then press the
ENTER
2
Press the DOWN
buttons to select
"Edit Name", then
press the ENTER
button.
3
Press the UP/DOWN
buttons repeatedly until
the correct vcr appears.
After the vcr is entered,
press the ENTER
button.
Page 26
button.
English-
26