Space Allocation - Control Data Corporation Finch 9410-4 Hardware Installation/Operation Manual

After the drive is unpacked, inspect the drive for any visual internal damage
(circuit boards, actuator assembly, and read/write heads). Compare all parts
listed on the shipping bill with the received equipment. Discrepancies or
damage should be reported to the Sales Representative. Save the packing
materials; they can be used for reshipment.
3.3 OPERATING ENVIRONMENT
The environmental conditions required for optimum performance of the disk
drive are, in general,
the same as those in an office environment
with minimum
or no environmental control. These conditions are:
Temperature 50° to 104° F (10° to 40° C)
Humidity 20% to 80%
Altitude -983 to +6,562 feet (-300 to +2,000 meters)
The room temperature should not change more than 18° F (10° C) per hour.
Relative humidity should be kept between 20% and 80%. Avoid high relative
humidity
as much as possible
since it can cause condensation in the drive.
Very low relative humidity
should
also be avoided because
it can lead to par-
ticle attraction and accumulation by static electricity.
3.4 SPACE ALLOCATION AND MOUNTING REQUIREMENTS
Figure 3-2 shows overall dimensions of the drive for determining space alloca-
tion and mounting requirements.