Installation - Control Data Corporation Finch 9410-4 Hardware Installation/Operation Manual

INSTALLATION AND CHECKOUT 3
_———e—————
s
e seaeee———————ae = aa—n 7"
3.1 INTRODUCTION
This section provides the information and procedures necessary to install
and check out the FINCH Disk Drive. The FINCH is designed, manufactured,
and tested with a "Plug-in and Play" installation philosophy. Basically, this
philosophy minimizes the requirements for a highly trained person to inte-
grate a FINCH into their system.
3.2 UNPACKING
Visually inspect the shipping container for any obvious damage. During unpack-
ing, exercise care so that any tools being used do not cause damage to the unit.
As the drive is unpacked, inspect it for possible shipping damage. All claims
of this type should be filed promptly with the transporter involved. If a claim
is filed for damages, save the original packing materials.
CAUTION
Do not disengage the rotary-arm shipping lock illustrated in
Figure 1-1. Figure 3-1 shows the rotary arm shipping lock in
the locked and operating positions. To prevent damage to the
read /write heads or the disk itself, move the rotary-arm ship-
ping lock to the operating position only after installation has
been completed.
ROTARY ARM N
eI N LOCKED POSITIO
|— OPERATING POSITION
ROTARY ARM
SHIPPING LOCK
| — —L[=,UJ
FIGURE 3-1, ROTARY ARM SHIPPING LOCK POSITION
Goaoe
(Cstmee 3
77715819-A 3-1