NOVO MARK II Original Instructions Manual page 8

●Do not use the machine if the power cord or power plug is damaged or
if the power plugs is loosen when plugged into the power outlet.
●Do not damage, modify, excessively bend, pull on, twist, or fold up the power cord
or place it near a hot object or under a heavy object.
●If the supply cord is damaged, it must be replaced manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
●Do not insert a metal object, such as a pin or needle or other foreign object
in the intake vent, exhaust vent, or gaps between components at the machine body.
●Do not allow unsupervised use by children and keep out of the reach of children.
●Immediately stop using the machine if anything is abnormal or malfunctioning.
・If the power cord or power plug is abnormally hot.
・If the electricity stops and starts flowing when the power cord is bent.
・If you get shocked when touching the machine.
・If the abnormal sounds during operation.
・If there are air leaks.
・If there is another abnormality or malfunction.
During operation
Warning
To Prevent Burns
●During the machine operation
the red part will be very hot,
so never touch there.
8