Language Setting - Panasonic 4LINE KX-TGWA40 Installation Manual

Setting up
Connection
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the AC adaptor to the power outlet.
Fasten the AC adaptor cord by hooking it.
Connect the corded handset cord to the
corded handset and the desk phone until you
hear a click.
Note:
R Use only the supplied AC adaptor
KSAS0050750080VUD.
1
2
1
Note when setting up
Note for connections
R The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a horizontally
oriented AC outlet that faces the floor, such as
an AC outlet installed on a ceiling or under a
For assistance, please visit http://shop.panasonic.com/support
TGWA40_(en)_OI_1213_ver005.pdf 5
table, as the weight of the adaptor may cause it
to become disconnected.
Registering a unit to the
base unit
1
KX-TGWA40:
Press MRegN
2
KX-TGW420:
Press and hold MSpd DialN, then wait until a
long beep sounds.

Language setting

You can select either "English", "Español",
"Français" or "Português" as the display
language. The default setting is "English".
1
MMenuN
2
MbN: "Phone Settings" a MSelectN
4
3
MbN: "Language" a MSelectN
4
4
MbN: Select the desired setting. a MSelectN
5
Press MBackN or MHomeN repeatedly to return
to standby mode.
3
Getting Started
5
2019/12/13 11:11:07