Environmental Concerns - Electrolux EUC05002W User Manual

Hide thumbs Also See for EUC05002W:
Table of Contents

Advertisement

Available languages

Available languages

4. Take the door off.
5. Remove the screw fixing the lower door
hinge and the other screw fixing the lower
door hinge and the foot. Then remove the
door hinge and the foot as shown in the Figure.
6. Loosen the screw fixing the foot opposite the
lower door hinge in order to remove the foot.
7. Fix the door hinge and the corresponding
foot on the opposite side and then the other
loosened foot at the former place of the door
hinge as shown in the Figure.
8. Please make sure to place the lower
foot below the door hinge. The lower
foot is recognizable by its 4 ribs on the
outer surface.

ENVIRONMENTAL CONCERNS

The symbol
on the product or on its
packaging indicates that this product may not be
treated as household waste. Instead it should be
taken to the appropriate collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
9. Fix the door onto the lower hinge pin.
10. To fit top door hinge, remove the plastic blank-
2
11. Refit the top hinge using the 2 retaining
1
12. Replace the hinge cover.
13. Relocate the handle and the plastic plugs to
14. Level the appliance, wait for at least four
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter),
the gasket may not fit perfectly to the cabinet. In
that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above
mentioned operations, contact the nearest After
Sales Service Force. The After Sales Service spe-
cialist will carry out the reversibility of the doors at
your cost.
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
The appliance must be earthed. The power sup-
ply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is
not earthed, connect the appliance to a separate
earth in compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
ing plugs carefully, and refit them in the holes
left by the hinge retaining screws.
screws, taking care that the edge of the door
is parallel with side of the cabinet.
the opposite side.
hours and then connect it to the power socket.
electrolux 7

Advertisement

Table of Contents
loading

Table of Contents