Samsung SPP4231 Owner's Instructions Manual page 32

Storing Channels in Memory (Automatic Method)
First, select the correct signal source (Air, STD, HRC
1
and IRC). See steps on previous page.
Press the MENU button. Press the ▲ or ▼ button to
select "Channel", then press the ENTER button.
Press the ▲ or ▼ button to select "Auto Program",
2
then press the ENTER button.
➤
➤
Quick way to access the Automatic Channel Setting: Just press the
"AUTO PROG." button on the remote control.
Press the ENTER button.
3
The PDP will begin memorizing all of the available
channels.
After all the available channels are stored, the Auto
program menu reappears. Press the ENTER button to
stop.
Note
• The PDP automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
32
TV Channel
Air/CATV : Air
Auto Program
Add/Delete
Fine Tune
Scan
Move Enter
Channel
TV
Air/CATV : Air
Auto Program
Add/Delete
Fine Tune
Scan
Move Enter
Auto Program
Start
Enter
√
√
√
√
√
Return
√
√
√
√
√
Return
Return