Advertisement
Quick Links
1
Please read the
Owner's Manual before
operating this machine.
4
Fill solution tank with
water
(do not exceed
130 F).
7
Mount brush or pad driver
on the drive wheel hub
(rotate counterclockwise
until it locks).
10
Adjust water flow by
manually turning the
ball valve
Viper Fang 15B How To
Machine Operation
Sweep or dust mop the
surface to be cleaned.
2
Make sure the recovery
tank is locked.
5
Inspect squeegee blade
and install squeegee.
8
Lower squeegee to the
floor.
11
Press handle button to
engage brush. Repeat
this step if necessary.
3
Check battery status.
Make sure ball float is
clean.
6
Inspect squeegee blade
and install squeegee.
9
Turn on switches.
12
Adjust handle
lever below handlebar)
desired position. Begin
cleaning.
(squeeze
to
Advertisement
Related Manuals for Nilfisk-Advance Viper Fang 15B
Summary of Contents for Nilfisk-Advance Viper Fang 15B
- Page 1 Viper Fang 15B How To Machine Operation Sweep or dust mop the surface to be cleaned. Please read the Check battery status. Owner’s Manual before Make sure ball float is operating this machine. clean. Make sure the recovery tank is locked.
- Page 2 Viper Fang 15B How To Daily Maintenance Rinse, inspect and Inspect and clean, Empty recovery tank clean solution and cover gasket, vacuum and solution tank in recovery tank with screen and automatic slop sink or proper clean water. shut-off float.