English - Kenwood AT930A Instructions Manual

English

to adjust the paddle
paddle
sieves (fine and coarse)
height
colander bowl: AT930A Major
colander bowl: AT992A Chef
1 Unplug.
2 Raise the mixer head and insert the
before using for the first time
paddle.
Wash the parts: see 'cleaning'.
3 Hold the paddle, then loosen the
nut
to use your colander
4 Lower the mixer head.
and sieve
5 Adjust the height by turning the
paddle. The paddle blades should
1 Raise the mixer head.
bend slightly against the sieve.
2 Fit a round mixing bowl, not D-
6 Raise the head, hold the paddle and
shaped (if required round bowls are
tighten the nut.
available from your local stockist) .
cleaning
3 Insert your colander bowl. AT992A
models have cut-outs which slot
G Switch off before removing the
over the handles below .
paddle.
4 Insert a sieve .
G Wash by hand.
coarse sieve
G rough side up for removing fibres
from cooked fruit and vegetables, eg
rhubarb and spinach. Pureeing fruit
and vegetables eg bananas, cooked
potatoes and making biscuit
crumbs.
smooth side up for stoning cooked
G
fruit, eg plums, damsons.
fine sieve
G rough side up for pureeing cooked
fruit and vegetables eg tomatoes
and potatoes.
smooth side up for flour and soft
G
fruit, eg raspberries.
5 Insert the paddle: turn until it stops,
then push .
To remove it, turn.
G
6 Lower the mixer head.
G The paddle blades should bend
slightly against the sieve. If you need
to adjust the height, see 'To adjust
the paddle height'.
7 Allow cooked food to cool.
8 Switch to 'min'. Add 454g (1lb) of
food at a time. Clear the sieve
between batches.
Keep hands out of the bowl and
G
away from the paddle.
9 Increase slowly to speed 1 or 2 but
reduce if it splashes.
2
.