Mobile Ap - Samsung Gem SCH-i100 User Manual

Mobile AP

Use Mobile AP to share your device's 3G internet connection with
a PC or other device through Wi-Fi, using your device as a mobile
wireless hotspot.
Note: Mobile AP consumes battery power and uses data service.
To use Mobile AP, you need the Mobile AP feature from your wireless
provider. There is a monthly charge for the Mobile AP feature, and all
data used by connected devices will apply to the customer's data
allowance. Contact your wireless provider for more information.
Configuring Mobile AP Settings
Configure your device's Mobile AP settings, including your
device's name and password, and set the visibility of your
device's Mobile AP.
For more information, see "Mobile AP settings" on page 74.
Launching Mobile AP
Activate your device's Mobile AP application to allow other
devices to use your device's 3G internet connection.
From the Wireless & network settings menu, touch
1.
Mobile AP.
Touch Mobile AP to launch Mobile AP. Read the information
2.
about Mobile AP, then touch Accept to proceed.
Mobile AP consumes battery power. Read the information
3.
about battery usage, then touch Accept to proceed.
Your device establishes a connection to the network for the
4.
Mobile AP.
Activate Wi-Fi on your PC or other device, then follow the
5.
prompts on your device to connect.
Tip: Your device's default password is your device phone number. For more
information, see "Mobile AP" on page 73.
When you are finished using Mobile AP, touch Mobile AP
6.
to close the application.
Connections 73