Related Manuals for Valken Proton
Summary of Contents for Valken Proton
- Page 2 Adjustment procedure The Proton has a break beam sensor system with eye shields that prevent any dirt from entering the sensor. The eyes can be cleaned by simply The Proton has a standard ASA to accept a screw in air tank.
- Page 3 Programming Procedure Example (SW1 prevents / engages tournament lock) Your Proton comes out of the box capped at 25 BPS. You want to reduce the rate of fire cap to 15 BPS. Ensure your Proton doesn’t have an air PSP3: Three semi shots then transitions to 3 rounds burst.
- Page 4 Unscrew the cover and lift out the ball detent and spring. ASA with on/off and purge system The Proton has a standard threaded ASA with an ON/OFF knob that not only makes it safe to remove the tank but also releases all the air in To install the ball detent the marker and dump chamber.
- Page 5 Regulator Spring 12a 12b 12c 12d 12e 12f 12g 12h 12i Regulator Cap Oring M1 X 16.5 Regulator Stem and void your Proton warranty. Regulator Stem Rear Cushion Cap Oring -015 70 Duro Oring -014 70 Duro Oring -015 70 Duro...
-
Page 6: Warranty Registration Card
READ OWNERS MANUAL BEFORE USING. State/Province _________________________________________________ receipt. In the event that a part is defective Valken Sports will send out a replacement part free of charge. Wearable Zip Code _____________________________________________________ Rules of Safe Marker Handling”... - Page 7 Valken Sports, Inc. 1 Hawk Court Swedesboro, NJ. 08085...
Need help?
Do you have a question about the Proton and is the answer not in the manual?
Questions and answers