Toyota 4Runner 2021 Owner's Manual page 498

496
7-2. Steps to take in an emergency
4 Assembling the jack handle.
Remove the jack handle, jack handle extension bar and jack handle
bar from the tool bag and assemble by following these steps.
Loosen the bolts and the
1
screw using either the jack
handle or a screwdriver.
Assemble the jack handle
2
extension bars and the jack
handle bar and tighten the
bolts.
Check that the bolts are firmly
tightened.
Assemble the jack handle
3
extension bar and the jack
handle and tighten the screw.
Check that the screw is firmly
tightened.