Advertisement
Quick Links
The VS4x1(R)
and VS8x1(R)
Manual Version 4.0
A
LBUQUERQUE
(505) 898-1455
(505) 898-0159 FAX
www.burstelectronics.com
Hardware, software and manual copyright by Burst Electronics. All rights reserved. No part of this
publication may be reproduced or distributed in any form or by any means without the written permission
of Burst Electronics.
Video Switcher
Four/Eight Input
Vertical Interval
with RS232
, NM 87109 USA
Made in USA
Advertisement
Related Manuals for Burst Electronics VS4x1
Summary of Contents for Burst Electronics VS4x1
- Page 1 (505) 898-1455 (505) 898-0159 FAX www.burstelectronics.com Hardware, software and manual copyright by Burst Electronics. All rights reserved. No part of this publication may be reproduced or distributed in any form or by any means without the written permission of Burst Electronics.
-
Page 3: Operation
Interval Switcher. This manual will explain the various functions of the VS4x1/VS8x1 (as well as the RS232 options, model VS4x1R/VS8x1R). Unless otherwise stated, all functions of the VS4x1 are the same for the VS8x1. Overview The model VS4x1 is a four (4) input active switcher (VS8x1 is an eight (8) channel active switcher). - Page 4 Jumper/Switch Setting for the Sync Detect For the VS4x1 there is a DIP switch located inside the unit, just behind the front panel. Locate the small four (4) position DIP switch labeled S6. Move switch #2 from the open (up) position to the closed (down) position.
- Page 5 If this function is disabled, the audio switcher will not follow the switching commands of the video switcher. As shipped, the video switchers have the jumpers set to enable the follow mode function. VS4x1 & VS8x1 Video Switch...
- Page 6 To disable the follow mode for the VS4x1, remove the front panel, and slide the top cover off. Locate the four position DIP switch labeled S6. Move switch #1 from the closed (down) position to the open (up) position. The VS4x1 switcher will not send data to the AS4x1R or echo data to the computer.
-
Page 7: Jumper/Switch Settings
Successful video switch to the “x” channel (only if video is present on the input) Used in conjunction with the AS4x1R, successful audio/video switch to the “x” channel (only if video is present on the input) VS4x1 & VS8x1 Video Switch... -
Page 8: Specifications
Wall Module Power Supply Included (center Negative) Rack Mount VS4x1: Model RM-4 Holds 4 units Rack Mount VS8x1: Model RM-3 Holds 3 units There are also rack mounts that hold a mix of VS4x1 and VS8x1, call us for details. RS232 Protocol: 2400 Baud 8N1 Connector: 1/8 inch stereo (3.5 mm) 3 conductor...
Need help?
Do you have a question about the VS4x1 and is the answer not in the manual?
Questions and answers