Program Selector Switch; Commissioning And Operation - Klarstein Luca Instructions Manual

PROGRAM SELECTOR SWITCH

This appliance has the following program settings:
"Manual Speed" (M), On & Off (0), "Auto program".
Manual control for variable speeds
(Manual Speed)
Switch Off (On & Off)
Pulse (Auto program)
Ice Crusher (Auto program)
Smoothies (Auto program)
Dough mixing (Auto program)
Chopping (Auto program)
Auto Clean (Auto program)
Note: If you turn the knob to "0", the appliance stops operating and all functions are
reset.

COMMISSIONING AND OPERATION

Before Use
• Before connecting to the power, recheck the type of supply and the mains voltage
match with the details given on the rating label on the appliance.
• Using for the first time, rip off all wrapping paper and plastic bags. Clean the
fittings.
Commissioning
• Before you plug the power plug into the power outlet, set the rotary control to "0"
and only then set the rotary control to the desired position. The functions are not
available if the knob is not turned to the "0" position when the power is turned on.
This is a safety function to prevent accidents, which could cause the appliance to
start unexpectedly.
EN
21