Troubleshooting - oventrop Unibox TQ-RTL R-Tronic Operating Instructions Manual

Unibox TQ-RTL R-Tronic
9.

Troubleshooting

MALFUNCTION
The surface temperature
balance circuit does not get
warm.
102273880-V01.08.2019
CAUSE
Problems with the heating
system/heat generator.
The Duo connection piece for
two heating circuit is being
used (see Illust. 14 on page
37).
Troubleshooting
REMEDY
Increase the pump output (if
possible).
Check the resistances of the
heating circuits. All heating
circuits must have the same
resistance.
35