ABB Smile 41 AS-i Series Original Instructions Manual page 13

For the North American market (UL)
Enclosure
Cable assemblies
Power source
Conductor size
Safety / Harmonized Standards
Conformity
IEC/EN 61508-1...7
EN 62061
EN ISO 13849-1
EN 60947-5-1 & -5
EN ISO 13850:2008
Certification
2TLC172255M0201, rev. D
Type 1
Must comply with CYJV/7. Cord provided shall be 24 AWG (0.2mm
The Limited voltage source must comply with:
a) The maximum open circuit voltage potential available to the circuit shall not be
more than 42.4 V peak;
b) All external circuit interconnecting cable cables shall be protected against
burnout and damage to the insulation resulting from any overload or short
circuit condition per the following table, based on the cable conductor size.
Maximum ampere ratings of the overcurrent protection.
AWG (mm) Ampere.
22 (0.32) 3
20 (0.52) 5
18 (0.82) 7
16 (1.3) 10
14 (2.1) 20
12 (3.3) 50
European Machinery Directive 2006/42/EC
EMC 2014/30/EU
RoHS 2011/65/EU
EN ISO 12100:2010, EN ISO 13849-1:2015, EN 62061:2005/A2:2015,
EN 60204-1:2006+A1:2009, IEC 60664-1:2007, EN 61000-6-2:2005,
EN 61000-6-4:2011, EN ISO 13850:2015,
EN 60947-5-5:2005, EN 61508:2010
-6
SIL3, PFD : 2.95*10 , PFH : 6.95*10
avg D
SIL3
Performance level: PL e, category 4
MTTF : High
D
For E-stop button / safety stop button
For E-stop button / safety stop button
cULus
13
2
) minimum
-9
www.abb.com/jokabsafety