idiag SpiroTiger SMART User Quick Manual

SMART
ST
User's Quick Guide
SpiroTiger , always a
®
Breath ahead!
Direct respiratory endurance training increases
performance efficiency by a considerable amount.
Alongside this the entire upper body including the
sport dependent posture musculature is developed!
SpiroTiger offers a complete and comprehensive
®
training which takes all aspects of conditioning into
view.
Convince yourself of the «Extra-Power» of
SpiroTiger !
®
1. Starting
Screw fastening
with small opening
Individual
7
respiration bag
Assembly
Place the pieces, as shown above, on the table.
EN 1. Place the valve piston
and secure it into place using the screw fastening
(small opening).
2. Place the V-tube
2
3. Place the mouth tube
it using the second screw fastening
4. Place the respiration bag
V-tube and the mouthpiece
2
end of the mouth tube
Turning on the SpiroTiger
ENTER key for at least two seconds.
Turning off the SpiroTiger
ENTER key for at least three seconds.
If not used the device automatically shuts off after five
minutes.
2. Set-up
Entering training duration, respiration rate, and bag
size.
After the device has been turned on press the
the desired symbol starts to blink.
WATCH for training duration
FREQUENCY for respiration rate
BAG for respiration bag size
Select with the and
confirm it using the ENTER key
Setting ranges
• Training duration: 0 - 99 minutes
0 (zero) equals no fixed training duration
• Respiration rate: 15 - 60 breaths per minute
0 (zero) respiration rate means no given breathing
pace.
• Respiration bag size: 1.5 to 5.0 litre
Respiration bags are labelled with their size.
The respiration bag size has to be individually
determined for every user.
1 2
Valve piston V-tube
3
Handheld device
into the V-tube as shown
1 2
3
into the handheld device .
4
into the V-tube and fasten
5 2
(large opening).
6
on the open end of the
7
on the opening
8
.
5
device by pressing the
®
device by pressing the
®
key until
keys the desired value and
.
Screw fastening
with large opening
5
Mouth tube
4
Insertion of Batteries
Headquarters
: idiag AG, Mülistrasse 18
Switzerland
CH-8320 Fehraltorf
Phone +41 (0)44 908 58 58
Fax +41 (0)44 908 58 59
info@idiag.ch www.idiag.ch
Germany: idiag GmbH, Schaubingerstrasse 7
D-79713 Bad Säckingen
Phone +49 (0)7761 933 83 63
Fax +49 (0)7761 933 83 62
info@idiag.de www.idiag.de
6
8
Mouthpiece