Ford-Lincoln-Mercury Installations - Audiovox ACD-30 Owner's Manual And Installation Manual

FORD-LINCOLN-MERCURYINSTALLATION FORD-LINCOLN-MERCURYINSTALLATION FORD-LINCOLN-MERCURYINSTALLATION
FORD-LINCOLN-MERCURYINSTALLATION FORD-LINCOLN-MERCURYINSTALLATION
AllU.S.MadeCars,Trucks,andVansBuiltSince1985 AllU.S.MadeCars,Trucks,andVansBuiltSince1985
AllU.S.MadeCars,Trucks,andVansBuiltSince1985 AllU.S.MadeCars,Trucks,andVansBuiltSince1985 AllU.S.MadeCars,Trucks,andVansBuiltSince1985
Important-Measure the size of your existing radio opening. If it is no larger than the size shown on the
template provided, you can install the radio as explained on page 3 and 4. If the opening is larger, you
must use a kit. See Kit Listing on page 2. This radio cannot be installed in Ford cars built prior to 1985.
CAUTION:
1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!
2. FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20° OF
1. RemoveExistingRadio: 1. RemoveExistingRadio: 1. RemoveExistingRadio: 1. RemoveExistingRadio: 1. RemoveExistingRadio:
A. Remove existing radio dash trim panel surrounding the radio opening. This panel is usually
secured by screws and/or snap-in clips.
B. Remove the screws used to secure radio to the sub-dashboard.
Helpful Hint: If you do not have an existing radio, you will find the radio opening is covered by a
C. Pull the radio forward to access the wiring and antenna cables plugged into the rear of the chassis.
D. Un-plug the wiring harness(es) and antenna cable and remove the radio.
2. InstalltheNewRadio: 2. InstalltheNewRadio:
2. InstalltheNewRadio: 2. InstalltheNewRadio: 2. InstalltheNewRadio:
A. If a kit is not required, follow the instructions on pages 3 and 4. If a kit is required, follow the
instructions included with the kit and secure the sleeve from the radio to the mounting plate from
the kit as explained on page 3.
B. Install the sleeve/mounting plate assembly to the sub-dashboard as per the instructions with the
installation kit.
C. Replace the dashboard trimpanel.
D. Following the instructions of steps 4 and 5 on page 4, carefully wire the radio and complete
installation into the mounting sleeve.
IMPORTANT
7 7 7 7 7
AMOUNTINGKITISREQUIRED
FORTHISINSTALLATION
HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
disposable cover plate.
SUB-DASHBOARD
(RADIOAREA)
MOUNTINGPLATEFROMKIT
(NOTINCLUDEDWITHRADIO)
HELP!
1-800-645-7102
Monday-Friday 8:30am-7:00pmEastern
Saturday
9:00am-5:00pmEastern
FACTORYDASHPANEL
MOUNTINGSLEEVE
INSTALLRADIOUSINGSAME
PROCEDUREASEXPLAINED
ONPAGES3AND4
RADIO
REMOVALTOOLS
DETACHABLE
FRONTPANEL