Setting Timer; On Timer - Samsung ND022QHXEA User Manual

SETTING TIMER

This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are
away. Simply set the time and your air conditioner will turn on/off automatically.

On timer

This function allows you to turn on the air conditioner automatically within the time range of
24 hours. On timer is available while your air conditioner is on/off.
1. Press the On Timer button on the remote control.
On timer indicator blinks on the remote control display.
2. Set the time you want the air conditioner to turn on
automatically.
Press the On Timer button on the remote control to
change the time setting while On timer indicator is
blinking.
You can set the time up to 24 hours, increasing in 30
minute unit up to first 3 hours and in hourly unit after
first 3 hours.
3. Press the Power
The remote control display will show the hour(s) you have set.
The air conditioner will operate automatically at set time and then On timer indicator
disappears. If On timer is not set within 10 seconds, the air conditioner will end setting.
4. Set the operating mode.
Press the Mode button on the remote control until the
desired mode appears on the remote control display.
The air conditioner will operate in the mode you set.
On timer function is available in Auto/Cool/Dry/Fan/
Heat mode.
• Temperature can also be adjusted.(See step 3 on page 15 for instructions.)
• After the set up while the unit is off, approximately after 10 seconds, all the other
• Setting time allows you to change by pressing the On Timer button. Press the On Timer
To deactivate the On timer
1. Press the Power
On timer you set will be canceled and On timer indicator will disappear.
ND£ª£ª£ªQHX£ª£ª_IB IM_32064A_E_4.08.10.indd 21
& Set/Cancel button on the remote control to active it on.
indicators will be gone except the On timer indicator and remaining time.
button to change time setting and then press the Power
active it on.
& Set/Cancel button on the remote control.
& Set/Cancel button to
using advanced functions _21
2010-4-8 10:52:31