Gait up GO Quick Start Manual page 5

Get started with GaitUp GO – Normal use (1/ 2)
1 Charge Physilog®6 device with the provided
USB-C cable.
The device can be charged on a computer or
using a mobile phone charger.
3
Select a participant in the Dashboard.
5
Assign tests to the participant and « Start ».
Direct access to the results" is recommended
to be activated. In this way, reports can be
directly generated at the end of the test.
© 2020 Mindmaze SA & Gait Up SA. All Rights Reserved. MindMaze, Gait Up, Gait Up GO the Mindmaze LOGO, the Gait Up LOGO and Physilog are trademarks or registered
trademarks of Mindmaze Holding SA.
2
Fill the login information (user id,
password) and tap "Login". Login to the
App.
4
Start a "New session".
6
Test(s) previously assigned appear in
the app. Tap on the test to start. The
test will appear in green colour after it is
successfully completed.