It is possible to reset the IP address back to factory default value by pressing and
holding the RESET button for
external sensor connector P1 on the back panel.
Change administrator password
Enter new password if you want to change it.
Default password is "admin".
Click on the "save new password" button when finished.
Current password
New password
Confirm new password
User Manual / NDA 100/3 TH(S) RG L30 230AC(PoE) LAN
5
seconds. The RESET button is located near the
Enter current password.
Enter new password, max. 10 characters.
Re-enter new password.
13