Tektronix 4 Series Instructions page 2

Rotating the handle
CAUTION. Hold the top of the handle to carry the
instrument. Do not hold the handle from the sides and
rotate, as this can pinch the base of your thumb between the
handle and the case.
If you have routed any cables between the handle and the
case, be careful when rotating the handle so that you do
not pinch the cables.
Copyright © Tektronix, Inc. All rights reserved.
Install the cover on the oscilloscope
The oscilloscope front cover is packed inside the hard case.
Remove the cover from its packing material and attach it to
the instrument.
Pack the oscilloscope and accessory pouch in the transit case
Unpack the oscilloscope
To remove the oscilloscope from the case, insert your hands
into the foam cutouts on either side of the instrument, reach
under the instrument, and lift the instrument up and out from
the foam liner.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your
area.
www.tek.com