Maintenance; Technical Data - Hyundai HC 910 Instruction Manual

IV. MAINTENANCE
Do not use rough and aggressive detergents! Wipe the trimmer surface with a wet
soft cloth.
Cleaning blades
Clean the blades with the brush attached. For thorough cleaning, the entire
trimming head B can be removed. When you want to re-attach it, put the plastic
projection in the rear part of the trimming head into the opening in the trimmer
and re-attach the trimming head (snap it in).
In order to keep the trimmer in a perfect condition, you have to lubricate the list
with blades using one or two drops of oil for sewing machines. Do not use hair
oil, petroleum jelly or oil mixed with petrol or any other solvent because after
evaporation the solid parts of the lubricant could slow down operation of the
blades. Insert the trimming head to the trimmer properly, turn on the trimmer and
then turn it off and wipe out the excessive oil from the blades.
Storage
Put the trimmer with the accessories back to the original package at a dry and
dust free place, out of reach of children and incapacitated people.
V. TECHNICAL DATA
Voltage (V)
Trimmer weight (kg)
Appliance Protection Class
Dimensions (H x L x W)
Noise level: Acoustic noise level of 72 dB (A) re 1pW.
The manufacturer reserves the right to change the technical specifications
and accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR
IN THE INSTRUCTIONS MANUAL:
WARNING: Do not use this product near water, in wet areas to avoid fire
or injury of electric current. Always turn off the product when you don't
use it or before a revision. There aren't any parts in this appliance which
are reparable by consumer. Always appeal to a qualified authorized
service. The product is under a dangerous tention.
specified on the type label
0.3
II.
45 x 230 x 55 (without attachments)
23 / 30
GB