Hyundai HC 910 Instruction Manual page 21

Hair and beard trimmer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
Never use the appliance if the power cord or
power plug are damaged, if the appliance is
not correctly operating or if it has fallen on the
floor and been damaged, or if it has fallen into
water. In such cases take the appliance to a
professional service centre to verify its safety
and correct function.
The trimmer must not be used at places where
it could fall into a bath tub, a wash basin or
a swimming pool. If the dryer fell to water
anyway, do not take it out! First of all, unplug
the supply cord from the socket and only then
remove the trimmer. In this case take the
appliance to a special service to check its safety
and proper function.
Always unplug the appliance from power supply
if you leave it unattended and before assembly,
disassembly or cleaning.
For additional protection we recommend
installation of current protection (RCD) with the
nominal release current not exceeding 30 mA. Ask
a control technician or an electrician for advice.
– The appliance is intended for use in households only and for similar use!
It is not designed for use in hair salons or for similar commercial use!
– Do not plug the power cord in the electrical socket and do not unplug it with
wet hands or by pulling the power cord!
– Never immerse the appliance into water (even its parts)! Do not wash
it under running water!
– Never leave the product unattended when in operation!
– Keep the appliance dry.
– Use only the accessories designed for this type. Do not use damaged adapters.
– Do not handle plug or appliance with wet hands
– In case the cutting lath or one of the cutting attachments gets blocked, the
appliance must be turned off immediately and the cause removed.
– Check regularly, if the blades are not damaged or deformed.
21 / 30
GB

Advertisement

Table of Contents
loading

Table of Contents