Table of Contents
Advertisement
Quick Links
JAXON CORNER DESK
ASSEMBLY INSTRUCTIONS
A. LEFT TOP SECTION 1PC
B. RIGHT TOP SECTION 1PC
C. LEFT LEG 1PC
D. RIGHT LEG 1PC
E. MIDDLE SUPPORT 1PC
1
2
ALLEN BOLT
06
PCS
(M8x70)
6
7
04
SPRING WASHER
PC
(M6)
TOOL REQUIRED
PHILLIPS HEAD SCREW
DRIVER NOT PROVIDED
JAXON CORNER DESK ASSEMBLED
F. STRETCHER 1PC
3
07
ALLEN BOLT
ALLEN BOLT
PCS
(M8x40)
(M6x90)
8
04
FLAT WASHER
PCS
ALLEN KEY
(M6)
4
04
13
SPRING WASHER
PCS
PCS
(M9)
01
PC
5
13
FLAT WASHER
PCS
(M9)
Advertisement
Table of Contents
Related Manuals for Modus Furniture JAXON CORNER DESK
Summary of Contents for Modus Furniture JAXON CORNER DESK
- Page 1 JAXON CORNER DESK ASSEMBLY INSTRUCTIONS A. LEFT TOP SECTION 1PC JAXON CORNER DESK ASSEMBLED B. RIGHT TOP SECTION 1PC C. LEFT LEG 1PC D. RIGHT LEG 1PC E. MIDDLE SUPPORT 1PC F. STRETCHER 1PC ALLEN BOLT ALLEN BOLT ALLEN BOLT...
- Page 2 ON A FLAT, LEVEL AREA LAY DOWN A CLEAN BLANKET OR TOWEL. PLACE BOTH THE LEFT (A) AND RIGHT TOP SECTIONS (B) UPSIDE DOWN ON. CONNECT THE SECTIONS WITH TWO M8X70 ALLEN BOLTS (1), M9 SPRING WASHERS (4) AND M9 FLAT WASHERS (5) THROUGH THE FRAME. ADDITIONALLY, USE THREE M8X40 ALLEN BOLTS (2), M9 SPRING WASHERS AND M9 FLAT WASHERS TO CONNECT THE CORNER FRAMING, PER THE ILLUSTRATION.
- Page 3 CONNECT THE LEFT (C) AND RIGHT LEGS (D) TO THE TOP ASSEMBLY WITH ONE M8X70 ALLEN BOLT, M9 SPRING WASHER AND M9 FLAT WASHER THROUGH THE CENTER TOP OF THE LEG. USE TWO M8X40 ALLEN BOLTS, M9 SPRING WASHERS AND M9 FLAT WASHERS TO CONNECT THE OUTSIDE EDGES OF THE LEGS.
- Page 4 WITH THE HELP OF A SECOND PERSON, FLIP THE DESK RIGHTSIDE UP. TO INSTALL THE DRAWER HANDLE, OPEN THE DESK DRAWER AND UNATTACH THE HANDLE. REPOSITION THE HANDLE ON THE OUTSIDE AND TIGHTEN USING THE PROVIDED SCREWS. ASSEMBLY COMPLETE.
Need help?
Do you have a question about the JAXON CORNER DESK and is the answer not in the manual?
Questions and answers