Dell Latitude 3400 Service Manual page 43

3. Align and replace the thermal plate on the solid-state drive/Intel Optane card slot [1,2].
4. Replace the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [3].
Next steps
1. Replace the battery cable.
2. Replace the base cover
3. Replace the SD memory card
4. Follow the procedure in
Removing the M.2 Solid-state drive bracket
Prerequisites
1. Follow the procedure in
2. Remove the SD memory card
3. Remove the base cover
4. Disconnect the battery
Steps
1. Remove the single (M2x3) screw that secures the solid-state drive bracket to the palmrest and keyboard assembly [1].
2. Remove the solid-state drive bracket from the palmrest and keyboard assembly [2].
after working inside your computer
before working inside your computer
cable
Demontáž a instalace součástí 43