Advertisement
2.5 Shaping of rectangles , squares , etc.
The method is the same as the point 2.4 . If you want to obtain different dough shapes , you
can cut the dough to the approximate shape , for example squares , rectangle etc.
knife or a special tool , and then place into the top roller. Choose from the following
methods.
A)Run the dough through the highest rollers only.
B)Run the dough through both the highest and the lowest rollers.
C)Run the dough through the highest roller , then turn the dough 90ºand then run it through
the lowest rollers.
2.6 How to regulate the thickness
Adjusting the machine is based on the different characteristics of the dough, ie weight
thickness , size and the shape of the disk. The machine adjustment must be made based
on experience. The machine is preset with a medium size adjustment for the shape of pizza
dough. To obtain a different dough thickness , adjust as follows :
A) Turn off the machine.
B) Adjust the width between the highest rollers. Turn the black knob to release the lever ,
and then turn the lever to the desired position, clockwise to reduce the thickness,
counterclockwise to increase the thickness. (Pic.3)
Note: The width between the upper rollers is twice the width between the lower rollers.
Warning : To avoid dangers and/or possible injuries caused by electric current , mechanical parts ,
fire or hygiene problems , you must follow these safety instructions step by step :
3.1 Keep your work area neat and tidy. Disorder can cause dangerous accidents.
3.2 Consider environmental conditions. Do not use the machine in a humid , wet or badly lit
environment or close to inflammable liquids or gas.
3.3 Keep away from children and non authorized personnel. Do not permit them to go near the
machine or the work area.
3.4 Do not touch the switch or cable with wet hands.
3.5 Only utilize the machine using the correct voltage. Normal usage gives better results.
3.6 Dress correctly. Do not wear loose hanging clothes or any items which can be caught in
machine. Use non-slip shoes. For hygiene and safety, keep your hair tied back and wear
protective gloves.
3.7 Protect the cable , do not pull on the cable to extract the plug. Do not leave the cable
near high temperatures , sharp objects , water or solvents.
3.8 Unplug the unit when the machine is not in use , before cleaning , maintenance
or moving.
3.9 Check that the machine is not damaged. Before using the machine , carefully check all
safety devices are working, removable parts are not blocked , there are no damaged
parts ,all the parts have been set up correctly and all the conditions that could affect
the regular functioning of the machine are in working order.
3.10 When the machine is damaged or not working correctly , turn off the machine
and contact customer service. Repairs must only be performed by qualified
personnel , using original spare parts. Non-compliance to these rules could be
dangerous for the user and will void the warranty.
3.Warning
with a
Advertisement
