Advertisement
Dimensions of parts
S type (EF mount)
SP type (PL mount)
Spur gear specifications
Focus drive gear
Number of teeth
133
Module
0.8 metric module
P.C.D.
106.4 mm
Angular rotation
300 degrees
GENERAL SAFETY INFORMATION
The safety warnings and cautions provided on the product or in this operation manual must be observed. Failure to
observe these warnings and cautions may result in injury or accident.Read this operation manual carefully to familiarize
yourself with its contents and ensure that you can operate the product properly.
Also, store this manual in a safe place where it can easily be referenced whenever necessary.
This operation manual uses the following symbols and terms to identify hazards in order to prevent accidents.
This indicates a potentially hazardous situation which, if not heeded, may result in
WARNING
death or serious injury to you or others. Be sure to heed all warning notices to ensure
safe operation at all times.
This indicates a potentially hazardous situation which, if not heeded, may result in a
CAUTION
minor injury to you or others, or damage to property.
This indicates cautions and recommendations for operation. It contains information
NOTE
which, if not heeded, may result in this product failing to function properly. These no-
tices also contain useful information for operation.
HANDLING THE PRODUCT
WARNING
1. Do not stare at the sun or other bright objects through the lens. It may injure your eyes.
CAUTION
1. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall off and cause
injury.
2. Inspect mountings regularly (about every six months to one year) to ensure they are securely tightened. If a
mounting becomes loose, parts may fall off and cause injury.
NOTE
1. Do not expose the lens to strong impact. Striking or dropping the lens may cause the malfunction of the product.
2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture. Otherwise it
may cause the malfuction of the product.
3. Take measures to avoid sudden changes in temperature where the lens is used, which may prevent operation
temporarily if condensation forms in the lens.
DEALING WITH ABNORMALITIES
WARNING
If any of the following situations occurs, immediately dismount the lens from the camera and contact Canon's
representative or the dealer listed below.
• Smoke, fumes, or unusual noises
• Entry of foreign objects (such as liquid or metal objects) inside the product
MAINTENANCE AND INSPECTION
NOTE
1. Clean off any dust on the lens surface using a lens blower or a soft lens brush. In case of getting fingerprints or
stains on the lens, use a clean cotton cloth moistened with commercial lens cleaning fluid, or use lens cleaning
paper. Gently wipe in a spiral pattern from the center of the lens. Be careful not to rub dust across the lens,
which may scratch the lens surface.
2. Routine inspection about once a year is recommended, depending on the conditions and environment of use.
Request overhaul, if needed.
CAUTION
Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without the caps or
covers attached poses a risk of fire if the lens concentrate light in direct sunlight.
NOTE
Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry cloth. Seal the
lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside. Otherwise it may cause the
mold or the malfunction of the product.
Pub No. BT1-B040-A
φ
φ
Zoom drive gear
Iris drive gear
111
111
0.8 metric module
0.8 metric module
88.8 mm
88.8 mm
93.5 degrees
55 degrees
STORAGE
Specifications
Unit: mm
Lens Mount
Focal Length
Maximum T-stop
Iris Blades
Super 35mm
Coverage
Image Circle /
H x V (1.78:1)
Angular Field of View
(H / V) at wide angle end
Angular Field of View
(H / V) at telephoto end
EOS C300
Coverage
Image Circle /
H x V (1.78:1)
Angular Field of View
(H / V) at wide angle end
Angular Field of View
(H / V) at telephoto end
EOS C500
Coverage
Image Circle /
H x V (1.9:1)
Angular Field of View
(H / V) at wide angle end
Angular Field of View
(H / V) at telephoto end
Minimum Object Distance (M.O.D.)
Super 35mm
Object
Dimensions at
EOS C300
M.O.D.
EOS C500
Focus Angular Rotation
Zoom Angular Rotation
Spur Gear Module
Front Diameter
Length
Weight
* A variety of professional camera accessories compatible with the φ15 mm and φ19 mm rod system can be
used with this lens.
* This lens is compatible with EOS cameras that have a Super 35mm or equivalent sensor, or an APS-C image
sensor. The lens is not compatible with cameras that have a 35-mm full-size sensor or an APS-H sensor.
Reference Information
This lens is a full manual lens for shooting movies.
• This lens is developed primarily for movie production, and have a color balance typical for movies. This means that the
color reproduction is warmer than that of EF lenses which are basically used to shoot still images. Therefore, when using
both types of lens together, adjust the color balance (redo the white balance etc.) as necessary.
• In general, the depth of field becomes shallow and the focusing range becomes extremely narrow near the widest
aperture and when shooting a subject at close range. In addition, this tendency increases for lenses with longer focal
lengths. When shooting images, carefully check the focusing condition using the zoom mode of the finder or other means,
and shoot a sufficient number of test images before performing focus operations.
(for EF mount Lens only)
• The T-numbers of this lens are indicated on the iris ring of the lens. On the other hand, the iris information from this lens to
the camera uses the F-number in consideration of use together with conventional EF lenses. Therefore, the camera side
displays a different value (F-number) from the indication on the iris ring of the lens.
• Information of the focal length displayed on the camera side omits the figures below the decimal point.
1. Canon shall bear no responsibility for damage resulting from improper operation of this product by the customer.
2. Canon shall make no guarantees about the product quality, functions, or operation manual and its marketability
and suitability for the customer's purpose.
Moreover, Canon shall bear no responsibility for any damage, direct or incidental, that results from usage for the
customer's purpose.
3. Canon shall make no guarantees about the results obtained using this product.
4. The product specifications, configuration, and appearance are subject to change without prior notice.
5. For further information on repairs, maintenance, or adjustments not mentioned in this operation manual, contact
your Canon dealer or your Canon sales representative.
6. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting
Canon or your Canon sales representative.
For CN-E30-105mm T2.8 L S only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
For CN-E30-105mm T2.8 L S only
For CN-E30-105mm T2.8 L S only
Only for European Union and EEA (Norway, Iceland, and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste, according
to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a
designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product
or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper
handling of this type of waste could have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service.
For more information regarding return and recycling of WEEE products, please visit
www.canon-europe.com/weee.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Europe Ltd
3 The Square, Stockley Park, Uxbridge,Middlesex, UB11 1ET UK
© 2017.06 CANON INC.
CN-E30-105mm T2.8 L S
Canon EF
30 to 105 mm
T2.8 (f = 30 to 105)
11 pieces
φ27.5 mm /
24.0 x 13.5 mm
43.6 / 25.4 degrees
13.0 / 7.4 degrees
φ28.2 mm /
24.6 x 13.8 mm
44.6 / 25.9 degrees
13.4 / 7.5 degrees
φ29.6 mm /
26.2 x 13.8 mm
47.2 / 25.9 degrees
14.2 / 7.5 degrees
0.6 m / (from the image sensor)
32.3 x 18.2 cm at wide angle end
9.3 x 5.2 cm at telephoto end
33.1 x 18.6 cm at wide angle end
9.6 x 5.4 cm at telephoto end
35.3 x 18.6 cm at wide angle end
10.2 x 5.4 cm at telephoto end
300 degrees
93.5 degrees
0.8 metric module
φ114 mm
218 mm
2.2 kg
TO THE CUSTOMER
FCC REGULATIONS
Canadian Radio Interference Regulations
CAN ICES-3(B)/NMB-3(B)
All rights reserved. No part of this operation manual
may be reproduced or copied in any from or by any
means without the written permission of Canon Inc.
CN-E30-105mm T2.8 L SP
PL
210 mm
4/6
Advertisement
